Step into a world of creativity and discovery with our hands-on workshops. Designed to inspire young minds, each session blends fun with learning through activities like building, designing, experimenting, and problem-solving. Whether it’s robotics, arts, engineering, or themed projects, our workshops empower children to think critically, work collaboratively, and unleash their imagination in a supportive, engaging environment.
The STEM & Robotics program is designed to help kids gradually develop programming skills from basic to advanced. It combines hands-on learning with play. During the program, kids will build functional ENGINO models, conduct experiments to learn through practical experience, and then create and program their own devices and robots.
Children can explore various STEM topics and seek solutions to everyday problems using pre-made Engino models
Advanced programming concepts and primary block-based coding. This empowers children to direct their robot's movements
Traditional tools and gaining practical experience in 3D printing and laser cutting provide hands-on learning with modern technology
Kids brainstorm and design their solution, test it, evaluate it, modify it, and present it to their peers and community
For 13+ years
"Professional Engineers" is a two-year STEM & Robotics program for children aged 13+. As teenagers gain more expertise, they use our Engino Produino Controller and seamlessly transition to textual coding. Our dynamic KEIRO™ app offers an Arduino mode, allowing them to switch from block-based charts to advanced coding.
Furthermore, the Produino controller features an integrated Arduino processor, opening up a world of open DIY projects. Their knowledge expands with STEAM exercises and activities packed into their student books. They now use advanced mechanical components to build and complete projects and masterfully engineer robots and our GinoBot™, embracing a future prosperous with innovation and endless possibilities.
For 7-9 years
"Young Engineers" is a two-year STEM & Robotics program for children aged 7 to 9. It aims to develop their cognitive abilities and promote progress in areas such as problem-solving skills, memory, attention span, abstract thinking, reading and writing, and numeracy. This prepares children for advanced academic challenges and more complex social interactions.
• Young learners construct models that align with the STEM theme using Engino Qboidz and Engino Classic parts. As they progress, the complexity of their models and challenges increases. During some sessions, they are introduced to our 3D Builder application, where they can also design/build their models virtually.
• Models come alive by integrating motors, LEDs, IR and touch sensors, and Engino ERP Mini controller. After mastering manual programming, kids delve into diverse programming options, controls, functions, and operators using our KEIRO™ app
• Children can test programs they create on the Engino EnViRo™ Simulation Software, a dynamic tool that helps them become skilled at programming. Moreover, they can record and play a program just like they would by pushing the physical buttons on the controller using our EnginoRobot BT™ App.
• Open Project, where they apply their knowledge to solve a problem using a design engineering approach. They research, design, test, evaluate, modify, and present their solutions to peers and the community, breaking down complex projects into manageable steps.
For 10-12 years
"Master Engineers" is a two-year STEM & Robotics program for children aged 10 to 12. It aims to develop cognitive abilities and promote progress in logical thinking, strategic planning, and solving complex problems. It also aims to improve memory, attention span, understanding of abstract concepts, and critical thinking abilities. Furthermore, it helps enhance mathematical skills, including complex arithmetic operations and understanding higher-level mathematical concepts. These prepare children for advanced academic challenges and more complex social interactions.
• Master learners use Engino Classic parts to construct STEM-themed models and program them to increase in complexity as they progress.
• Engino ERP Pro controller with up to 8 outputs enables these models to easily navigate dynamic tracks and courses. This controller allows obstacle detection, sound generation, and precise line following.
• Children also learn to use the drop-down option in KEIRO ™, which converts pseudocode into real code, establishing a connection between programming and coding.
• Children learn to create loops using controls such as 'IF/Else' and 'Repeat' in conjunction with operators, functions, and variables.
• Children can test programs they create on the Engino EnViRo™ Simulation Software, a dynamic tool that helps them become skilled at programming. Moreover, they can record and play a program just like they would by pushing the physical buttons on the controller using our EnginoRobot BT™ App.
For 4-6 years
"Junior Engineers" is a two-year STEM & Robotics program for children aged 4 to 6. It aims to develop their cognitive abilities and promote progress in areas such as language, memory, problem-solving, and social cognition. This prepares children for the challenges of formal education and more complex social environments.
• Junior learners build models using Engino Qboidz following instructions on our KidCAD™ 3D Viewer app, aligning with the STEM theme.
• Moreover, they gain insight into scientific phenomena, such as the functionality of solar panels, by integrating solar panels and motors into their models, thereby animating them and grasping the fundamental principles at play.
• Manual programming challenges, starting with single outputs, such as motor programming, and progressing to dual outputs, such as LEDs, to allow the creation of manual programming sequences.
• The programming journey ends with FACEBOT, a ready-to-program robot that familiarizes children with advanced programming concepts and block-based coding for directional commands, empowering them to direct their robot's movements.
• An Open Project where kids apply their knowledge to solve a problem using the design engineering approach. They research solutions, design and test their ideas, make modifications, and present their final solution to peers and the community.
Have a question, feedback, or just want to say hello? Fill out the form below and we’ll get back to you as soon as possible.
Explore our hands-on programs in STEM & Robotics and Makerspace. Choose between regular or member pricing and enjoy engaging, instructor-led sessions every month. Each plan includes 4 sessions designed to build skills and spark creativity!
Hands-on STEM & Robotics workshops
The price includes 4 sessions per month
Return policy: We are committed to ensuring your satisfaction with our workshops. If you enroll and attend your first workshop, which doesn't meet your expectations, we offer a full money-back guarantee. Please note that this policy applies to your first workshop experience only.
Sure. In the Engino Booking System choose a 'Free Introductory STEM & Engineering Workshop (age 4-9)', provide your contact information, confirm the visit via SMS until some days before workshops, and bring your child to the STEM Center. Pay for a full month if your child likes workshop.
These STEM activities are designed for preschool and school-age children and focus on developing cognitive abilities, communication skills, problem-solving skills, and programming skills. They also provide hands-on experience with modern tools for creating real-world device prototypes.
The Workshops are structured as two-year programs for specific age groups. Each program consists of two-month modules, with one 90-minute weekly session (60 minutes for preschoolers).
The STEM & Robotics program is tailored for ages 4-6, 7-9, 10-12, and 13+ years old. The Makerspace program is tailored for ages 7-9, 10-12, and 13+ years old.
Engino Workshops run from September to July.
Workshops are held on weekdays from 14:30 to 19:15 and on Saturdays from 9:30 to 13:15.
The Engino Workshops consist of up to 9 children. The children work in small groups.
The child can come the next day if the same workshop is held, and a place is available.
The duration of one session is 90 minutes, but for preschoolers, it is 60 minutes.
Workshops are held at two locations:
STEM Centre Cyprus (Limassol), Kolonakiou 57, Agios Athanasios
STEM Centre Cyprus (Nicosia), Larnakos Ave 87a, Aglantzia.
Monthly subscription includes 4 sessions, once a week.
Engino Workshops will be in Greek and English.
The default monthly subscription cost is:
STEM & Robotics
90 Euro/Month — 90 minutes session per week,
70 Euro/Month — 60 minutes session per week,
Makerspace
100 Euro/Month — 90 minutes session per week.
However, by becoming an Inventor Club Plus Member, you can reduce this price to:
STEM & Robotics
80 Euro/Month — 90 minutes session per week,
60 Euro/Month — 60 minutes session per week,
Makerspace
90 Euro/Month — 90 minutes session per week.
For instance, if you plan to purchase an 8-month STEM & Robotics Workshop subscription for 720 Euro, you could opt for the membership at 30 Euro and only pay 640 Euro for 8 months.
If you enroll and attend your first workshop, which doesn't meet your expectations, we offer a full money-back guarantee. Please note that this policy applies to your first workshop experience only.
There are two ways to make a booking:
1. Online through the Engino Booking System
2. Offline at STEM Centers.
Engino Workshops do not require you to buy a STEM & Robotics set.
